ปิดการขายCNC 5 Axis Interface Breakout Board For Stepper Motor Driver

Started by wichan293, September 03, 2016, 04:56:32 PM

Previous topic - Next topic

wichan293



ของใหม่
350B/ea
550B/2ea
Promotion ถึง วันที่ 8 กย 59


รายละเอียดสินค้า
read more
http://tips-inter.lnwshop.com/product/10/cnc-5-axis-interface-breakout-board-for-stepper-motor-driver-cnc-mill-mach3

Features:
•   Fully support control via parallel port, such as MACH3,etc.
•   USB power supply and external power supply are seperate for safety.
•   External power supply input: 12-24V. Equiped with anti-reverse connection function.
•   All input signal will be isolated by optical coupler for further connection with emergency
•   stop,tool setter, limit, ect for PC safety.
•   One relay output port for control spindle on/off. The output interface. is P17.
•   One 0-10V analog voltage output port for control of inverter that has relative analog interface,
•   and for control of spinle speed. The output interface is P1.
•   If all 17 interfaces are activated, drivers equipped with optical coupler can be controled and
•   5 axis stepper motor can be controled.
•   As PWM output, P1 can control spindle speed regulator that is equipped with optical coupler.
•   Connection with 5V input drivers that has common cathode or anode is supported.

Specifications:
Dimension:Approx. 90 x 70 x 18mm
Cable length:Approx.130 cm
Color:Green
Weight:118 g
Package weight:138 g

Package included:
1 x MACH3 Interface Board
1 x USB Cable